A few months ago, I spent a week or two testing out different GUIs that will run on the Raspberry Pi (RPi). These included: Universal Gcode Sender (UGS), Chilipeppr, GrblWeb, and bCNC.
I tested these, because I wanted to get my nice laptop out of the dust and metal chips. Since the RPi is $30-$35, has DVI out/USB/Ethernet, and is fanless, this seemed like perfect solution. If it breaks, no big deal. Just swap it out.
After testing, I found that only two of the four GUIs worked under...
bCNC and the Raspberry Pi
I tested these, because I wanted to get my nice laptop out of the dust and metal chips. Since the RPi is $30-$35, has DVI out/USB/Ethernet, and is fanless, this seemed like perfect solution. If it breaks, no big deal. Just swap it out.
After testing, I found that only two of the four GUIs worked under...
bCNC and the Raspberry Pi