Dear Readers,
The open builds actuator testing data sheet reports a repeatability of 0.078 mm and a accuracy of 0.091 mm for the C-Beam™ Linear Actuator Bundle Pack. How could I improve the repeatability and accuracy to reach 0.02 mm or better? Would changing the lead screw from 8mm/turn to 5 mm/turn help?
The torque and load of the part which will be transported are negligible and the travelling speed is of minor importance.
Thank you for your help and with my best regards.
The open builds actuator testing data sheet reports a repeatability of 0.078 mm and a accuracy of 0.091 mm for the C-Beam™ Linear Actuator Bundle Pack. How could I improve the repeatability and accuracy to reach 0.02 mm or better? Would changing the lead screw from 8mm/turn to 5 mm/turn help?
The torque and load of the part which will be transported are negligible and the travelling speed is of minor importance.
Thank you for your help and with my best regards.