Hi,
I need help to configure my Z-axis.
As I have all axis identical (same motors, same lead screws... etc) , I set
Xaxis= 200step/mm
Yaxis= 200step/mm
Zaxis= 200step/mm
For X and Y those setting are close enough to real moving of machine.
BUT Z axis moves several times more then it should move. ( For example, I type a command to move 10mm, and Z axis moves close to 45 mm.
What I am doing wrong, and how it could be?
If I connect X motor to the Z axis connector the same thing...
GRBL configuration , Z axis problem !!!
I need help to configure my Z-axis.
As I have all axis identical (same motors, same lead screws... etc) , I set
Xaxis= 200step/mm
Yaxis= 200step/mm
Zaxis= 200step/mm
For X and Y those setting are close enough to real moving of machine.
BUT Z axis moves several times more then it should move. ( For example, I type a command to move 10mm, and Z axis moves close to 45 mm.
What I am doing wrong, and how it could be?
If I connect X motor to the Z axis connector the same thing...
GRBL configuration , Z axis problem !!!