Hi all,
Having built a 3D printer, I decided to use it to build a small engraver/ cutter, using a Arduino duo and a CNC shield this worked out very well, but the laser module , supposedly a 2.4w, but it only had a cheap driver built in, so I decided to add an external ttl driver, while waiting for the board I went about making some further upgrades.
Added a Z axis and a raspberry pi3, with a protoneers Hat, the firmware consisted of QBRL and BCNC.
But I am finding BCNC very difficult to...
I need some help here
Having built a 3D printer, I decided to use it to build a small engraver/ cutter, using a Arduino duo and a CNC shield this worked out very well, but the laser module , supposedly a 2.4w, but it only had a cheap driver built in, so I decided to add an external ttl driver, while waiting for the board I went about making some further upgrades.
Added a Z axis and a raspberry pi3, with a protoneers Hat, the firmware consisted of QBRL and BCNC.
But I am finding BCNC very difficult to...
I need some help here