Hello,
Because this being my first post on this forum... my name is Gerard. I'm from the Netherlands and recently build my own CNC router, the Ox Metal (see picture below). After solving most of my encountered problems myself (so far) during this build, I'm now out of options to solve this one on my own.
I have an issue/problem with the accuracy of my machine being off by approximately 1%. As stated earlier I recently build the Ox-Metal using the CNC-Xpro V3 controller with 4 Nema23...
Travel distance accuracy off by 1% in Ox Metal build. >Problem solved<
Because this being my first post on this forum... my name is Gerard. I'm from the Netherlands and recently build my own CNC router, the Ox Metal (see picture below). After solving most of my encountered problems myself (so far) during this build, I'm now out of options to solve this one on my own.
I have an issue/problem with the accuracy of my machine being off by approximately 1%. As stated earlier I recently build the Ox-Metal using the CNC-Xpro V3 controller with 4 Nema23...
Travel distance accuracy off by 1% in Ox Metal build. >Problem solved<