Happy Sunday
So I decided I wanted to put some homing switches on my OX CNC. I put one on the front of the frame for the Y axis. The switch works but Im not sure the front even though the tinyg documentation says it should be is the right place. When I tell it to home Y it always heads to the back of the machine. I tried swapping the motor polarities in the firmware wondering if that controlled what direction it would home in but no dice. It still wants to go to the back. Also when I...
Limit switches and negative coordinates with TinyG.
So I decided I wanted to put some homing switches on my OX CNC. I put one on the front of the frame for the Y axis. The switch works but Im not sure the front even though the tinyg documentation says it should be is the right place. When I tell it to home Y it always heads to the back of the machine. I tried swapping the motor polarities in the firmware wondering if that controlled what direction it would home in but no dice. It still wants to go to the back. Also when I...
Limit switches and negative coordinates with TinyG.